Pixel King - M Mode Group Configurations; Flash Group Settings in M Mode

15
3 different flash groups under M mode:
a) A+B+C（ALL）
1. 3 groups are using the same setting.
2. This setting method is same as
menu.
3. Transmitter can be turned off or on
the group, but cannot set flash
power on transmitter.
b) A:B
1. This setting means is turned off
group C output.
2. Set group A and B output as
different power.
3. Group A output is same as content
setting.
c) A:B C
1. This mode is turned on all the
groups and different power setting
for each group.
2. Group A output is same as content
setting.
3. Flash cannot use exposure
compensation when power output
under M mode.