PixelRange PixelPar - Chase Effects; On;Off Ratio

4
Chase effects
Thissectiondescribeseachoftheinternalchaseeffectsthatareselectableeitherviathecontrolmenu(PROG
>
C1/C2
>
EFEC)orusingDMXvaluessentfromanexternalsource.Tousetheinternaleffects,settheMODE option either to EF M
(forinternalmenucontrol),orEF D or 4+E(forexternalDMXcontrol).
DMX DMX EFEC Chase effect description On/off ratio Cell sequence
value % value per cell
0-7 0-2
00
 Off - -
8-15 3-5
01
 Rainbowchaseforward Allon A
à
B
à
C
à
D
à
E
à
F
16-23 6-9
02
 Rainbowchasereverse Allon F
à
E
à
D
à
C
à
B
à
A
24-31 10-11
03
 Whitechaseforward 1/5 A
à
B
à
C
à
D
à
E
à
F
32-39 12-15
04
 Whitechasereverse 1/5 F
à
E
à
D
à
C
à
B
à
A
40-47 16-18
05
 Whitegroupchase 1/2 AF
à
BE
à
CD
48-55 19-21
06
 Whitestrobe 1/1 Alltogether
56-63 22-24
07
 Redstrobe 1/1 Alltogether
64-71 25-27
08
 Lightpurplestrobe 1/1 Alltogether
72-79 28-30
09
 Yellowstrobe 1/1 Alltogether
80-87 31-34
10
 Greenstrobe 1/1 Alltogether
88-95 35-37
11
 Whitestrobe 1/10 Alltogether
96-103 38-40
12
 Lightbluestrobe 1/10 Alltogether
104-111 41-43
13
 Rainbowstrobe 1/2 Alltogether
112-119 44-46
14
 Red/green/bluestrobe 1/2 Alltogether
120-127 47-50
15
 Rainbowstrobe Allon Alltogether
128-135 51-53
16
 Red/green/bluestrobe Allon Alltogether
136-143 54-56
17
 Yellow/bluestrobe Allon Alltogether
144-151 57-59
18
 Rainbowstrobe Allon Alltogether
152-159 60-62
19
 Yellow/bluechase Allon ACE
à
BDF
160-167 63-65
20
 Red/bluechase Allon ACE
à
BDF
168-175 66-68
21
 Red/yellowchase Allon AB
à
CD
à
EF
176-183 69-72
22
 Red/green/bluechasereverse Allon CF
à
BE
à
AD
184-191 73-75
23
 Rainbowchaseforward Allon AB
à
CD
à
EF
192-199 76-77
24
 Red/green/bluechasereverse Allon EF
à
CD
à
AB
200-207 78-81
25
Static orange All on All together
208-215 82-84
26
 Staticyellow Allon Alltogether
216-223 85-87
27
 Staticlightblue Allon Alltogether
224-231 88-90
28
Static purple All on All together
232-239 91-93
29
Static red All on All together
240-247 94-97
30
Static green All on All together
248-255 98-100
31
 Staticwhite Allon Alltogether
The‘On/Offratiopercell’columnindicatestheproportionoftimethataxturewillbeshowingoutputorbedarkfora
giveneffect.Forexample,1/5indicatesthatthexturewillbeonforonepartandofffor5partsofthetime.
Someeffectsarespreadbetweensixcellssothataswellascolourchanges,therearepositionchanges(viewableifyou
areusingthePixelParasamastertocontrolchasesonotherPixelRangextures-see‘Usingmastermodetodriveother
units’).The‘Cellsequence’columnaboveindicateswhethereffectchangesmovebetweenxturesthataresetatdifferent
celladdresses.Thecelladdressboundariesareasfollows:
Cell DMX addresses
 A 1to4
 B 5to8
 C 9to12
 D 13to16
 E 17to20
 F 21to24
Note: When you use a single PixelPar and you choose
a chase effect that spreads across different cells, you will
see only the cell A parts of the effect, as listed in the table
above.