Pknight WIFI-DMX Easynode PLUS User Manual

Pknight
®
WiFi-DMX EasyNode Manual Page 13
Pknight
®
WiFi-DMX EasyNode Manual Page 14
Pknight® WIFI-DMX EasyNodePknight® WIFI-DMX EasyNode
Multiple modes Multiple modes
pknight
PKNIGHT.WIFI
1
5
2
3
4
How to do?
It's easy for our mobile phone or tablet PC.Let's
follow the picture to set up the controller's
network.First connect the mobile phone to the
hotspot signal of the controller.Than open the
mobile browser to do the operation as shown in
the gure below
1
Enter 192.168.4.1 in the browser
2
Select the "WiFi" function bar
3
Enter the WiFi information of the router
4
Uncheck the Stand Alone checkbox
5
Save Change
Follow the steps in the gure above to
connect all the controllers to the router
one by one,the color indicator flashes
on the controller should try different.
Disconnect the power to the controller
for 3 seconds, then reconnect it,At this
point, if your settings are correct, the
controller will automatically connect to
the router’s WiFi signal,If not, please
check again.
Open the mobile WiFi interface, wait
for the router WiFi signal to appear and
connect to this signal.
Now it's good to go!

Pknight WIFI-DMX Easynode PLUS Specifications

General

Brand	Pknight
Model	WIFI-DMX Easynode PLUS
Category	Controller
Language	English