14
OPERATING INSTRUCTIONS (cont.)
How To Adjust A Setting
1. Press the MENU-button to activate the OSD window (Figure 5).
2. Press ∧or ∨ to navigate through the functions. Once the desired function
is highlighted, press the MENU-button to activate it. If the function
selected has a sub-menu, press ∧ or ∨ again to navigate through the
sub-menu functions. Once the desired function is highlighted, press
MENU-button to activate it.
3. Press ∧ or ∨ to change the settings of the selected function.
4. To exit and save, select the exit function. If you want to adjust any other
function, repeat steps 2-3.
Figure 5 The OSD Message
To Next Page
Loading...
