Planet Audio P9689 User Manual

ADJUST SETTINGS
E - 10
Adjust Audio Setting
Tuner Setting
Bass
Tuner Area
Treble
Fader
Balance
User can use the Encoder Volume knob to adjust
the desired Bass level range from -6 to +6.
User can use the Encoder Volume knob to adjust
the desired Treble level range from -6 to +6.
User can use the Encoder Volume knob to
adjust the Fader between the front and rear
speakers from 12R (full rear) to 12F (full front).
User can use the Encoder Volume knob to adjust
the Balance between the right and left speakers
from 12R (full right) to 12L (full left).
User can rotate the Encoder Volume Knob to
select the below Audio Settings, then press
Power/Mute to confirm.
User can rotate the Encoder Volume Knob to
adjust the Tuner Settings, then press
Power/Mute to confirm.
Press the MENU/INFO button access into the
System Menu. User can rotate the Encoder
Volume Knob to select the below options,
then press Power/Mute to confirm.
This option allows the selection of the
frequency spacing appropriate for your area.
Rotate the Encoder Volume Konb to select the
Tuner Area: U.S.A, Europe, Oirt, Latin.
Adjust System Setting
Preset Equalizer Setting
Beep Tone
Time Set
To adjust the Beep Tone On/Off. The beep tone
feature allows the selection of an audible beep
tone to be heard each time a button is pressed
on the face of the radio.
The time on the clock will be set to 12:00 as the
default. User can rotate the Encoder Volume
Konb to adjust the HOUR / MINUTE.
User can rotate the Encoder Volume Knob to
select the System Settings, then press
Power/Mute to confirm.
Under the Preset EQ Setting, there are the
below 8 different types of preset equalizer
available for user selection.
TIPS
Press and hold LIST button on the front panel
is to quick get into the Preset Equalizer
Setting menu.

Planet Audio P9689 Specifications

General

Brand	Planet Audio
Model	P9689
Category	Car Receiver
Language	English