Planet HPOE-2400G Quick Installation Guide

5
3. Starting Web Management
The following shows how to start up the Web Management of the PoE+ Managed
Injector Hub. Note the PoE+ Managed Injector Hub is congured through an
Ethernet connection. Please make sure the manager PC must be set to the same IP
subnet address.
For example, the default IP address of the PoE+ Managed Injector Hub is
192.168.0.100, then the manager PC should be set to 192.168.0.x (where
x is a number between 1 and 254, except 100), and the default subnet mask is
255.255.255.0.
PC/Workstation with
Web Browser
Gigabit 802.3at PoE+ Managed Injector Hub
192.168.0.x
IP Address:
192.168.0.100
RJ45 Management Port
Management
LNK/ACT
Figure 3-1: IP Management Diagram

Planet HPOE-2400G Specifications

General

Brand	Planet
Model	HPOE-2400G
Category	Switch
Language	English