Need help?Do you have a question about the Planet ICA-W7100 and is the answer not in the manual?
Details H.264 compression, resolution, multi-streaming, and audio support.
Comprehensive list of technical parameters for camera, video, and audio.
Explains the reset button for factory defaults and bracket mounting options.
Steps for initiating the IP Finder II software installation.
Using the IP Finder II tool to locate cameras on the network.
How to use the IP Finder II to search for connected network cameras.
Steps to manually configure a static IP address for the camera.
Details on firmware updates, config backup, restore, and reboot.
Configuring Internet Explorer 6 security settings for camera access.
Detailed steps for adjusting ActiveX controls and plug-ins in IE 6.
Steps for configuring ActiveX controls in IE 7 for Windows XP and Vista.
Steps to establish a connection from a PC to the camera using IE browser.
Steps to download and install the required video player for camera access.
Steps to allow ActiveX controls after player installation.
Running the ActiveX control for secure web management access.
Details on default login credentials and user role limitations.
How to navigate to and display the live video stream.
Explanation of PTZ, audio, snapshot, zoom, and recording controls.
How to query and play back recorded video files.
Configuring main and sub-stream video format, resolution, and frame rate.
Setting audio format, sampling rate, input, and output volume.
Adjusting brightness, contrast, saturation, and day/night mode.
Configuring static IP or DHCP for network connection.
Setting up the camera to connect to a wireless network.
Setting the local time, time zone, and synchronizing with PC or NTP server.
Specifying motion detection windows, sensitivity, and alarm linkages.
Managing micro SD card capacity, information, and formatting.
Specifying the record plan, schedule, and auto-cover settings.
Procedures for updating firmware and rebooting the device.
To Next Page
General
