Planet PAX IM30 - Viewing Terminal Software Version

PAX IM30 Setup and User Guide
weareplanet.com
12
Viewing Software Version
1. To view the Software version on your terminal you will need to enter the IntegraTE PAX menu, you
will need to press and hold the ‘Planet' icon at the top of the screen.
2. When “Please Enter Password” is displayed, enter password and press the green Enter button.
3. Select “Config/Configuration”.
4. Then, select “Info”.
5. The relevant software version will be displayed, along with the Terminal ID and Hardware ID
1
2
3
4