6. Downloading software/rmware
1. To view the Software version on your terminal you will need to enter the IntegraTE PAX menu, you
will need to press and hold the ‘Planet' icon at the top of the screen.
2. When “Please Enter Password” is displayed, enter password and press the green button.
3. Select “Config/Configuration”.
4. Select “Update”.
5. Select “Firmware”.
6. The user must then verify that the information on the “Enter the TMS IP/DNS” and “Enter the TMS
port” screens match the information shown below.
7. Assuming the information matches, the user can proceed by tapping the green “Enter” button on
both screens.
*TMS IP depending on the use case. In production we have 194.7.129.134 for global use, and
065.216.73.214 as alternative in the US. The TMS Port is 8953 for Global and US use.
8. This will take you to the “Enter TMS TID” screen.
To Next Page
Loading...