Need help?Do you have a question about the Planet POE-1200 and is the answer not in the manual?
General| Data Transfer Rate | 10/100/1000 Mbps |
|---|---|
| Power Supply | AC 100-240V, 50/60Hz |
| Product Type | Managed PoE Switch |
| PoE Standard | IEEE 802.3af/at |
| Number of Ports | 24 |
| MAC Address Table | 8K |
| Storage Temperature | -40°C to 70°C |
Provides a detailed overview of the POE-1200/POE-2400 features and capabilities.
Details the key functionalities and specifications of the PoE Injector Hub.
Guides users through the physical installation process for the PoE Injector Hub.
Explains the primary methods for managing the PoE Injector Hub, focusing on Web Management.
Covers viewing system information, IP configuration, and password settings for the device.
Details PoE configuration options and output status, including power limit and priority.
Provides access to system reboot, configuration backup/restore, and firmware upgrade functions.
Explains the initial process of detecting a valid Powered Device (PD) before power is applied.
Describes how the PSE determines the power requirements of a detected PD.
Addresses frequently encountered problems with the PoE Injector Hub and provides solutions.
To Next Page
