Planet SGSW-2402 - Page 46

42
Please type “Help” on the command line, the main menu displays all the system command usage that are
available as below:
Figure 4-3 SGSW-2402 Console command Screen
SYS--SYSTEM MANAGEMENT COMMANDS
sys show info
sys show ip
sys show ethernet address
sys set ip <IP Address> <Subnet Mask> <Default Gateway>
sys set name "string"
sys set contact "string"
sys set location "string"
sys set password
sys set link_info <on|off>
sys reset system
sys reset config
sys save config
LOGOUT--EXIT MANAGEMENT COMMANDS
Logout
PORT--PORT MANAGEMENT COMMANDS
port show
port set enable <port number> [-h|-f] [-10|-100|-1000] [-A]
port set disable <port number>
port set flw <port number> <on|off>
port set bck <port number> <on|off>
port set pri <port number> <-p priority>
port set vid <port number> <-v vid>