Planet WDAP-W7200AC - 3 Hardware Installation; Antenna Installation

5
3. Hardware Installation
3.1 Antenna Installation
Step 1 Connect the 2.4GHz antennas to the RP-SMA connectors of the WDAP-
W7200ACthatindicates“2.4GHz” on the bottom panel.
2.4GHz 2.4GHz
2.4GHz
Step 2 Connect the 5GHz antennas to the RP-SMA connectors of the WDAP-
W7200ACthatindicates“5GHz” on the top panel.
5GHz5GHz
5GHz