User Manual of WDRT-731U
-18-
2. In the run box type “cmd” and click OK. (Windows Vista users type “cmd” in the Start .Search box.)At the
prompt.
Figure 4-6
Open a command prompt, and type ping 192.168.1.1, and then press Enter.
If the result displayed is similar to Figure 4-7, it means the connection between your PC and the
Router has been established well.
Figure 4-7 Success result of Ping command
If the result displayed is similar to Figure 4-8, it means the connection between your PC and the
Router has failed.
To Next Page
Loading...
