Need help?Do you have a question about the Planet WRT-414 and is the answer not in the manual?
General| Brand | Planet |
|---|---|
| Model | WRT-414 |
| Category | Wireless Router |
| Language | English |
Lists included items and details the key functionalities and capabilities of the WRT-414.
Outlines the technical standards, signal types, and modulation used by the WRT-414.
Step-by-step connection guide and explanation of router LED status lights.
Setting the router's time zone and selecting the Internet connection type.
Configuration steps for establishing an Internet connection via a Cable Modem.
Configuring PPPoE, PPTP, and L2TP connections with required ISP details.
Specific configuration for Telstra Big Pond Internet service in Australia.
Instructions on saving network configurations and applying them to the router.
Manages router's time zone, password, and remote management access.
Configure the router's connection to the Internet Service Provider.
Configure the router's IP address, subnet mask, and DHCP server settings.
Enable/disable the wireless module and configure basic wireless settings.
Configure WEP, 802.1x, WPA-PSK, and WPA RADIUS for wireless network security.
Create and configure rules for prioritizing network traffic based on various criteria.
Redirect incoming traffic and configure the router as a virtual server.
Configure port settings for specific applications and enable UPnP.
Select applications needing ALG support to pass through the NAT gateway.
Define rules to restrict user access and block specific websites.
Configure firewall for DoS attacks and set up DMZ for unrestricted host access.
Configures the router to function as a wireless access point for network clients.
Sets the router to operate as a wireless station in ad-hoc or infrastructure modes.
Configure AP Bridge for Point-to-Point, Point-to-Multipoint, and WDS connections.
Monitors the current status and details of the router's Internet connection.
Provides operational information and records attempts of illegal access to the network.
Shows DHCP clients and displays packet counters for network traffic.
Tools to backup, restore, or reset router configurations to factory defaults.
Instructions for upgrading firmware and performing a system reset.
To Next Page
