You may press “Refresh” to get the new client table or “Close” to close this dialog
box.
After configuration complete, please click “Apply” button to save the configuration. Then you will
see a screen to prompt you the settings are save successfully. You may press “Continue” for
configure other settings or “Apply” to restart WRT-414 with new configuration.
6.2 Station - Ad Hoc Mode
WRT-414 serves as a wireless station (Ad-hoc) in this mode. Connected to a PC or a small
LAN (no more than 5 PCs), this station along with other wireless stations can establish a small
wireless network without Access Points.
- 61 -
To Next Page
Loading...
