Parameters Description
Configuration Tools
Use the "Backup" tool to save WRT-414 current configuration to a file
named "config.bin" in your PC. You can then use the "Restore" tool to
restore the saved configuration to WRT-414. The "Restore to Factory
Defaults" tool can force WRT-414 to perform a power reset for restore it to
original factory settings.
After configuration complete, please click “Apply” button to save the configuration. Then you will see a
screen to prompt you the settings are save successfully. You may press “Continue” for configure other
settings or “Apply” to restart WRT-414 with new configuration.
8.2 Firmware Upgrade
This page prompt you it allows you to upgrade the router’s firmware. Please press “Next” to
continue.
- 77 -
To Next Page
Loading...
