Planet WDRT-731U - 5.3 Security Settings

User Manual of WDRT-731U
-35-
 Username: Enter the PPPOE account provided by your ISP.
 Password: Enter the PPPOE password provided by your ISP.
 Address mode:
Select “Dynamic” if you don’t get any IP info from the L2TP server side,
otherwise select “Static”.
 IP Address:
Enter the IP address provided by your ISP. Inquire your local ISP if you
are not clear.
 Subnet mask: Enter the subnet mask provided by your ISP.
 Default Gateway:
Enter the gateway provided by your ISP. Inquire your local ISP if you are
not clear.
 MTU:
Maximum Transmission Unit.
The default value is 1492