Planet WGS-5225-8P2S - Configuring Ip Address

16
1. For security reason, please change and memorize the
new password after this first setup.
2.OnlyacceptcommandinlowercaseletterunderCLIinterface.
6.1 ConguringIPAddress
The Wall-mount Managed Switch is shipped with default IP address shown
below:
IPAddress:192.168.0.100
SubnetMask:255.255.255.0
To check the current IP address or modify a new IP address for the Wall-
mountManagedSwitch,pleaseusetheprocedureasfollows:
DisplayoftheCurrentIPAddress
1.Atthe“#” prompt, enter “show ip interface brief”.
2.ThescreendisplaysthecurrentIPaddressshowninFigure6-2.
Figure 6-2: IP Information Screen