Planet WGS-5225-8P2S - 7 Recovering Back To Default Configuration

19
7.RecoveringBacktoDefaultConguration
IPAddresshasbeenchangedoradminpasswordhasbeen
forgotten –
To reset the IP address to the default IP address “192.168.0.100” or reset
theloginpasswordtodefaultvalue,pressthereset button on the front panel
for about 5 seconds. After the device is rebooted, youcan log in to the Web
interface management within the same subnet of 192.168.0.xx.
9
Reset
10
Figure 7-1: Wall-mount Managed Switch Reset Button