Planet WNL-U556M - 5.1.2 Soft Access Point Security

300Mbps 802.11n Wireless USB Adapter
WNL-U556M
5.1.2 Soft Access Point Security
To set up security options for Soft Access Point, configure “Wireless Network Security” as follows:
The setup items about wireless security are listed below:
Object Description
Network Authentication
Select the network authentication mode from the dropdown menu.
Select the dat
a encryption method from the dropdown menu.
Data Encryption
ASCII / PASSPHRASE
If the encryption method is WEP, check either “ASCII” or
“PASSPHRASE” box and input it in the box as WEP passphrase.
Select WEP
key index (1-4). If you don’t know which one you
should use, select 1.
Key Index
Network Key / Confirm
Network Key
If the network authentication mode is WPA, please input WPA
passphrase in both boxes.
To save changes, click “OK”; otherwise, click “Cancel” to discard changes.
-55-