Planet XGS-6350-12X8TR

Need help?

Do you have a question about the Planet XGS-6350-12X8TR and is the answer not in the manual?

Summary

1. Package Contents

2. Switch Management

Out-of-Band Management

Management via console interface for initial configuration or when in-band is unavailable.

In-Band Management

Management via Telnet, HTTP, or SNMP for configured devices.

3. Requirements

4. Terminal Setup

4.1 Logon to the Console

Steps to log in to the managed switch using default credentials via the console.

4.2 Configuring IP Address

Commands to assign an IP address and subnet mask to the VLAN1 interface, and procedures to display current IP information.

4.3 Setting 100 BASE-TX for Gigabit Ethernet Port

Commands to configure Gigabit Ethernet ports for 100BASE-TX speed.

4.4 Setting 1000 BASE-X for SFP+ Port

Commands to configure SFP+ ports for 1000BASE-X fiber connection.

4.5 Changing Password

Command to change the default admin password for security.

4.6 Saving the Configuration

Procedure to save the running configuration to the startup configuration file.

5. Starting Web Management

5.1 Logging in to the Managed Switch

Steps to log in to the managed switch via the web interface using credentials.

5.2 Saving Configuration via the Web

Method to save the switch configuration using the 'Save All' button in the web interface.

6. Recovering Back to Default Configuration

7. Customer Support