Need help?Do you have a question about the Plantronics BackBeat GO 810 Series and is the answer not in the manual?
General| Type | Over-ear |
|---|---|
| Connectivity | Wireless |
| Microphone | Yes |
| Driver Size | 40 mm |
| Water Resistance | No |
| Frequency Response | 20 Hz - 20 kHz |
| Impedance | 32 ohms |
| Noise Cancellation | Active Noise Cancellation |
| Multipoint Pairing | Yes |
| Foldable | Yes |
First-time pairing process. Hear 'pairing', LEDs flash red/white.
Enter pair mode by holding power button until LEDs flash red/white.
Pair headset to Mac via Bluetooth by selecting it in System Preferences.
Takes up to 120 mins to fully charge. LEDs turn off when complete. Check battery status by pressing power button.
Diagram and list of headset controls including ANC, volume, play/pause, call button, and EQ settings.
Instructions for answering, declining, and calling back using the headset's buttons.
Control Active Noise Cancelling and cycle through EQ modes via buttons or the BackBeat app.
Locate lost headset by sending a tone via the BackBeat app's Find MyHeadset feature.
Provides contact details for Plantronics, Inc. and Plantronics B.V. for further assistance.
To Next Page