Need help?Do you have a question about the Plantronics Backbeat Go 2 and is the answer not in the manual?
General| Type | In-ear |
|---|---|
| Connectivity | Bluetooth |
| Battery Life | 4.5 hours |
| Talk Time | 4.5 hours |
| Charging Time | 2 hours |
| Weight | 14 grams |
| Microphone | Yes |
| Remote Control | Yes |
| Wireless Range | 10 meters |
| Driver Size | 6 mm |
| Frequency Response | 20 Hz - 20 kHz |
| Impedance | 16 ohms |
Initial Bluetooth pairing process for the earbuds, indicated by flashing red and blue lights.
Instructions for pairing the earbuds with additional phones or devices, up to eight.
Enables toggling connection between multiple paired devices, but only one active at a time.
How to check earbud battery status via voice alerts and indicator light flashes.
Using the charge case to power earbuds and checking charge case battery status.
Instructions for turning the earbuds on and off using the Audio/call button.
Controls for playing, pausing audio, and skipping tracks.
How to increase or decrease the volume using the volume buttons.
Instructions for muting and unmuting the microphone during calls.
Managing calls: answering, ending, declining, and call waiting.
How to redial the last called number using the Audio/call button.
Headset conserves battery by entering Deep Sleep mode when out of range for 20 minutes.
Bluetooth range and automatic reconnection attempts after a lost connection.
List of voice prompts provided by the headset for status updates.
Steps to reset the earbuds to factory settings, deleting paired devices.
To Next Page