Need help?Do you have a question about the Plantronics BackBeat PRO 2 and is the answer not in the manual?
General| Type | Over-Ear |
|---|---|
| Wireless Technology | Bluetooth |
| Bluetooth Version | 4.0 |
| Active Noise Cancellation | Yes |
| Battery Life | Up to 24 hours |
| Charging Time | 3 hours |
| Microphone | Yes |
| Foldable | Yes |
| Water Resistance | No |
| Frequency Response | 20Hz - 20kHz |
| Impedance | 32 ohms |
| Driver Size | 40 mm |
| Multi-point Pairing | Yes |
| Range | Up to 100 meters |
| Built-in Controls | Yes |
| Voice Assistant Support | Yes |
| Quick Charge | Yes, 10 min charge for 1 hour playtime |
| Wired Option | Yes |
| Weight | 289 grams |
Rotate the volume wheel forward (+) or backward (-) to control the audio volume.
Tap the Play/pause button to control music. Music pauses/resumes automatically when headset is removed/worn.
Use the Forward or Back buttons to skip tracks or select the previous track.
Slide the switch to hear your surroundings while wearing the headset.
Activate or deactivate ANC to block out unwanted ambient noise effectively.
Headphones charge fully in up to 3 hours; LEDs turn off upon completion.
Tap the Mute button during a call, or use smart sensors to take off/put on headset.
Answer calls by putting on the headset or tapping the Call button; end calls by tapping the Call button.
Double-tap the Call button to redial the last outgoing or incoming call.
Slide the switch to power the headset on or off.
Slide and hold the power button towards the Bluetooth icon until LEDs flash red and blue.
Consult the safety guide for crucial information on usage, charging, battery, and regulations.
Power on to start pairing. Activate phone's Bluetooth and select 'PLT BB PRO 2'.
Enable NFC on phone; tap headset to phone's NFC tag location to complete pairing.
Enter pairing mode and follow standard pairing steps on the second device.
Sensors enable automatic music resume/pause and call answering when headset is worn/removed.
Connect headset via USB and place on a flat, non-metallic surface for 10+ seconds to reset.
Download Plantronics Hub for firmware updates, settings personalization, and finding lost headsets.
To Next Page
