Connect the Plantronics base in 3 easy steps:
Please refer to the picture below for clarification of each step
1. Plug the EHS adapter into the phone’s headset port
2. Plug the EHS adapter into the headset base charging cradle
3. Connect power to the headset base charging cradle
Remember to charge your headset on the base for 8 hours before first use and leave
it charging on the base when not in use.
Additional Help
For more information on using your phone please visit dialplan.co.nz
For support with system configurations or problems please call 0800 342 575
To Previous Page
Loading...
