Need help?Do you have a question about the Plantronics CS510 and is the answer not in the manual?
General| Headset type | Monaural |
|---|---|
| Product type | Headset |
| Product color | Black |
| Wearing style | Head-band |
| Volume control | Digital |
| DECT connectable | Yes |
| Recommended usage | Office/Call center |
| Wireless range | 100 m |
| Connectivity technology | Wireless |
| Impedance | - Ω |
| Magnet type | - |
| Ear coupling | Circumaural |
| Headphone frequency | - Hz |
| Headphone sensitivity | - dB |
| Microphone type | Boom |
| Standby time | 95 h |
Details the front, back, and bottom components of the base unit.
Identifies and describes the parts of the headset unit.
Explains the EHS cable for remote call answer/end.
Describes the HL10 Lifter for automatic handset lifting and remote call control.
Instructions on how to adjust the headset headband for a comfortable fit.
Guidance on positioning the microphone boom for optimal voice pickup.
Steps to connect the power supply to the base and power outlet.
Instructions on how to place the headset in the cradle for charging.
Details the standard connection procedure for a desk phone.
Explains setup for desk phones using the HL10 lifter accessory.
Outlines the connection process for desk phones with an EHS cable.
Guide to setting listening/speaking volume dials and configuration switch.
Steps to make a test call and fine-tune audio levels.
Instructions for positioning and attaching the handset lifter arm.
Steps to ensure the lifter is correctly positioned and adheres to the phone.
How to adjust the lifter height to achieve a dial tone.
Information on using optional extender arms and ringer microphones.
Instructions for connecting the EHS cable to the base and desk phone.
Specifies minimum separation distances between base, phone, and computer.
Details the function of each button on the headset.
Information on the headset's battery life and factors affecting it.
Explains the audible alerts for low headset battery status.
Instructions on how to mute and unmute calls using the headset.
How to fine-tune headset volume using the headset buttons.
Describes tones indicating loss or re-establishment of wireless range.
Overview of the buttons and switches on the base unit.
Explains how to subscribe/resubscribe headsets to the base.
Details the meaning of the LED indicator lights on the base.
Guide on setting the switch for wideband or narrowband audio.
How to configure the auto answer feature for call management.
Steps to initiate an outgoing call using the headset.
Procedures for answering incoming calls with the headset.
Instructions on how to add multiple headsets to a call.
Addresses issues with degraded talk time performance after recharge.
Solutions for common desk phone connectivity and audio problems.
Troubleshooting steps for when the handset lifter does not function correctly.
To Next Page
