Name: Plantronics CS510
Brand: Plantronics
Rating: 5 (1 reviews)

To Next Page

To Previous Page

If You Do Not Hear a Dial Tone

1 If you do not hear a dial tone, raise the lifter height switch to the next highest position.

2 Repeat steps 2 through 5 above as necessary until you hear a dial tone.

3 When you hear a dial tone, secure the lifter as described in steps 6 though 8.

Additional Parts (if required)

Use extender arm when the handset lifter needs additional stability lifting and returning

handset to cradle.

Extender Arm

1 Slide extender arm onto lifter.

2 Stabilizers can be shifted left and right. Position stabilizers on outsides of handset to gently

grip the phone.

Ringer Microphone

Use ringer microphone only when the telephone speaker is not located directly under the

handset.

1 Remove cover from ringer microphone jack on back of lifter.

2 Connect ringer microphone plug.

3 Place ringer microphone over phone speaker. Remove adhesive tape and attach.

Other manuals for Plantronics CS510

Questions and Answers:

Need help?

Do you have a question about the Plantronics CS510 and is the answer not in the manual?

General