EasyManuals Logo

Plantronics CS510 User Manual

Plantronics CS510
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
11
Desk Phone plus HL10 Lifter (sold separately)
NOTE First follow the steps above for Desk Phone (Standard).
1 Firmly press the handset lifter power cord into the handset lifter jack.
USE
2 While wearing your headset, slide the handset lifter arm under the handset until the lifter base
touches the side of the phone.
3 Slide the lifter up to where it nearly touches the handset earpiece.
4 Press the call control button on your headset to activate the lifter.
5 If you hear a dial tone the lifter is set correctly and needs no adjustment.
6 Remove the protective strips from the 3 mounting tapes on the underside of the lifter.
7 Gently place the lifter on the desk phone in the pre-determined position.
8 Press firmly to adhere.

Other manuals for Plantronics CS510

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Plantronics CS510 and is the answer not in the manual?

Plantronics CS510 Specifications

General IconGeneral
Headset typeMonaural
Product typeHeadset
Product colorBlack
Wearing styleHead-band
Volume controlDigital
DECT connectableYes
Recommended usageOffice/Call center
Wireless range100 m
Connectivity technologyWireless
Impedance- Ω
Magnet type-
Ear couplingCircumaural
Headphone frequency- Hz
Headphone sensitivity- dB
Microphone typeBoom
Standby time95 h

Related product manuals