Speech Recognition Solutions
www.speechrecsolutions.com
Plantronics CS70 with GN Netcom SeleCT Switch
Set-Up and Instructions for Use
Although intended for use with a telephone, the Plantronics CS70N provides excellent
accuracy when used in conjunction with the SeleCT Switch and a personal computer
(PC). When used with this switch, the microphone can be toggled back and forth between
telephone and PC, depending upon your needs.
Preliminary Set Up: First you must make the basic connections of the CS70N, SeleCT
switch to your PC and telephone. Although there are alternative methods of making the
connections, and these are described in the literature contained in the CS70N and SeleCT
switch, the following figures show typical arrangements:
Figure 1: Standard Set-Up Figure 2: Computer Only Set-Up
Typical Setup in which CS70N is used for both personal
computer and PC. SeleCT switch is used to toggle
between CS70N output to either telephone or PC.
Simple setup in which CS70N is used only for
PC. SeleCT switch is omitted but audio cable
from SeleCT switch is used to the to make
connection from CS70N to PC (or sound
adapter)
Details:
1. A connection must be made from the receiver on the telephone to the modular
“handset” jack towards the front of the CS70N bottom.
To Next Page
Need help?
General
