The first time you power on your headset, it begins the pairing process.
1 Wearing your headset, power it on. You hear “pairing” and the headset indicator lights flash red
and white.
2 Activate Bluetooth
®
on your phone and set it to search for new devices.
• iPhone
®
Settings > Bluetooth > On*
• Android
™
Settings > Bluetooth: On > Scan for devices*
NOTE *Menus may vary by device.
3 Select “PLT_M180.”
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear “pairing successful” and the headset indicator lights stop
flashing.
After pairing your headset to your phone, you may want to pair another phone.
1 Power on your headset.
2 Press and hold the Call
button until you hear "pairing" or the indicator light flashes red and
white.
3 Activate Bluetooth on your phone and set it to search for new devices.
4 Select “PLT_M180.”
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear “pairing successful” and the headset indicator lights stop
flashing.
Pair
Get Paired
Pair another phone
5
To Next Page
Loading...
