11
TROUBLESHOOTING
1. Unit fails to turn on.
Hose or power connection problem.
Check the power cables for secure connection and make sure the hoses to your
PLATINUM are connected to the correct ttings, and that your cold water faucet
is turned on.
2. Flashing red light.
Oxidizing Module has failed.
Contact your dealer or lakeindustries.com/warranty for replacement.
3. No ozone smell in laundry.
Check the viewing glass for bubbles as it may be producing ozone but not
injecting it into the water correctly. If bubbles are present, the Oxidizing Module
may have failed.
Contact your dealer or lakeindustries.com/warranty for replacement.
4. No bubbles are being created.
Incorrect pressure before/after Venturi or Venturi is plugged.
First check for obstruction between the PLATINUM and the washer (inlet screen
to washer). Ensure house pressure at the supply valve has minimum of 40psi. If this
fails to correct the problem then backush your unit by switching the hoses on the
PLATINUM hose ttings and place the “Cold Water In” hose into the basin or bucket
to drain to clear the Venturi. Then return hoses to proper connections.
To Next Page