5
USING YOUR PLATINUM LAUNDRY PURIFIER
Daily Use
Using PLATINUM is very easy. You simply operate your washing machine according to the
instructions provided by the manufacturer. The only difference is that you ONLY use
the cold water setting on your washer. If hot water is used it dilutes and defeats the
effectiveness of the oxidizers that the PLATINUM has introduced into the wash water.
Top-Load Washing Machines
When using PLATINUM with a top-loading washing machine, ensure that a bold or dark-
colored clothing item is not in the direct line of the pouring water. It is recommended
to place a white clothing item directly under the pour stream to absorb the initially high
concentration of oxidizers.
Non-Use or Vacation Care
Operate your washer and PLATINUM only when you are at home. If you are on vacation
or won’t be using your washer for an extended period of time, you should unplug the
power supplies to both the washer and PLATINUM and turn off the water supply. This helps
avoid accidental ooding due to a water pressure surge while you are away.
Stains
We suggest that you pre-treat stains just as you would without a PLATINUM. However, for
normally soiled laundry, you should only need a very small amount of detergent or none at all.
How to tell the PLATINUM Laundry Purier is Working
You can easily tell if PLATINUM is operating properly by viewing the water as it ows through the
clear tube behind the window on the unit. Bubbles should be visible in the water as it ows through
and the window should emit a blue glow. If you do not see bubbles, please ensure that you have
the proper Venturi Setting (Using the Flow Rate Dial) selected for your washing machine. High-
efciency or front load washers should use the Front Load Setting, but standard-efciency top-
loading washers should use the Top Load Setting. If the Top Load Setting is used on a high-efciency
washer, there likely will be no bubbles and you will not experience the benets of using PLATINUM.
To Next Page
Loading...