- 8 -
(7) MOD 2. The brightness of this LED corresponds to the amount of modulation going into the oscillator’s
modulation 2 input
(8) MOD 1. The brightness of this LED corresponds to the amount of modulation going into the oscillator’s
modulation 1 input.
(9) OSC TYPE. These four LEDs indicate the selected oscillator type. There are 4 color groups, and each color
group has 4 LEDs to indicate the selected oscillator type. You can note desired oscillators by color (blue,
orange, red, or green) and LED number, 9-12.
(13) Filter resonance amount. The LED indicates the amount of resonance that is applied to the lter. Blue is no
resonance, red is maximum resonance.
(14) Filter Type. This indicates the current lter type. Green = High-pass, Aqua = Band-pass, Dark Blue = Low-pass
(15) Filter Modulation. The brightness of this LED corresponds to the amount of modulation going into the lter’s
modulation input.
(16) LFO2 speed. This LED ashes to show the speed of LFO 2.
Modulation Source Animations - These indicate the selected modulation sources for the oscillator and lter.
CTRL 1
LFO 1 is source: lights cascade down left side of the After Dark and illuminate red at (1).
LFO 2 is source: lights cascade down right side of the After Dark and illuminate red at (16).
Mod Attack is source: lights cascade down both sides of the speaker and illuminate red at (5) and (12).
No modulation: lights cascade down left side of speaker only and illuminate red at (5).
CTRL 2
LFO 1 is source: lights cascade down left side of the After Dark and illuminate red at (1).
LFO 2 is source: lights cascade down right side of the After Dark and illuminate red at (16).
Mod Attack is source: lights cascade down both sides of the speaker and illuminate red at (5) and (12).
No modulation: lights cascade down right side of speaker only and illuminate red at (12).
FILTER MOD
LFO 1 is source: lights cascade down left side of the After Dark and illuminate red at (1).
LFO 2 is source: lights cascade down right side of the After Dark and illuminate red at (16).
Mod Attack is source: lights cascade down both sides of the speaker and illuminate red at (5) and (12).
No modulation: lights ow counter-clockwise around speaker and illuminate red at (13).
(9) - (12)
To Next Page
Loading...
