Cut injures, loss of eyesight!
⚫ The product must never be contaminated with foreign bodies
/ adhesives / paint during assembly.
⚫ Modifications to the product are forbidden.
⚫ Always ensure that the motor is properly fastened.
⚫ Always ensure that the motor controller settings are correct.
⚫ The product must be sufficiently cooled.
⚫ Operation of the motor at idling speed without load is
prohibited.
Electric shock, burns, fire
Caused by energised parts.
⚫ The product must always be protected against overheating,
dirt and moisture, otherwise the components will be
damaged. This can cause short circuits.
⚫ The product as well as the contacts must be inspected for
overheating, soiling, deformation, fire and moisture before
commissioning.
⚫ Assembly and disassembly must be carried out only when in
de-energised condition.
⚫ Always ensure proper handling.
⚫ Modifications to the product are not permitted.
⚫ Always ensure that the motor is properly fastened.
⚫ The bending radius of the connecting cables must be greater
than 6x outer diameter.
⚫ The product must be sufficiently cooled.
⚫ Operation of the motor at idling speed without load is
prohibited.
To Next Page
Loading...