OM_Plettenberg_Electric_Motors | Version 1 | 2023.07.14 12
Injuries due to crushing, being caught up
Malfunction due to electromagnetic interference.
⚫ The control and phase cables must not be extended. The
product must be inspected and the fastening must be
controlled again before commissioning.
⚫ Modifications to the product are not permitted.
Danger from magnetic radiation
Malfunction / destruction of magnetically sensitive parts.
⚫ The motor must never come into contact with magnetically
sensitive parts such as pacemakers or data carriers. The
strong magnets can lead to damage and / or malfunction or
extinction of these.
Crushing, pulling in / being caught up
Caused by careless touching and too small a distance from
rotating parts.
⚫ There must be sufficient distance retained to the motor so that
no people or objects can be caught up or drawn in.
Burns
Caused by carelessly touching hot surfaces.
⚫ The surfaces could be hot after operating the product. Always
let the product cool down.
To Next Page
Loading...