Plockmatic 306+ - Advanced Operation and Troubleshooting

T10137 Jan 2003
Collator Series 300/400 Operator Manual 4-4
4.8 Disabling stacker motion
#petS noitpircseD noitcA setoN
1 rekcatselbasiD
noitom
rof"gnikcatstesffo/thgiartS"sserP
sdnoces)2(owtnahterom
eme
rtxefognildnahroF
srepapthgiewthgil
2 noitomrekcatsniageR "gnikcatstesffo/thgiartS"sserP
#petS noitpircseD noitcA setoN
1 deepsretnE
edomtnemtsujda
"edomgnimmargorpnoitceleS"sserP
sdnoces)2(owtnahteromr
of
lliwDELnibtsalehT
ehtdnaputhgil
wohsyalpsidretnuoc
01÷h/stesnideeps
2 gnitalloctceleS
deeps
edomgnimmargorp
noitceleS"sserP lliwretnuocehT
nideepsehtylpsid
01÷h/stes
3 tnemtsujdamrifnoC "edomgnimmargorpnoitceleS"sserP
n
ibehT(sdnoces)2(owtnahteromrof
)tuooglliwDEL
wonlliwretnuocehT
retnuocehtyalpsid
eulav
4.9 Collator speed adjustment
4.10 Disengaging bin´s with defective sensors*
#petS noitpircseD noitcA setoN
1 nibevitcefedetalosI
dnasrosnes
esehtegagnesid
s´nib
eromrof"noitarbilacdnatseT"ss
erP
sdnoces)5(evifnaht
skcehcscinortceleehT
dnasrosnesniblla
s´nibehtsegagnesid
srosnesevitcefedhtiw
2 retfas
´nibegagneeR
melborpehtfonoitcerroc
eromrof"noitarbilacdnatseT"sserP
sdnoces)5(evifnaht
This process can also be used to disengage bin´s with other problems. In this case the
feed roller shaft is removed and a sheet inserted (80 gsm or heavier) in the bin to cover
the bin sensor (simulating a defective sensor). Pressing ”Test and calibration” for more
thanve(5)secondswillnowdisengagethisbin.
*