PLX
www.plxdevices.com
7
Intelligent OLED display
Shows the percent charge remaining and the actual capacity
remaining in mAh.
Shows the amount of time (days:hours:minutes) remaining until
Luxor becomes empty.
Shows the amount of time (days:hours:minutes) remaining until
Luxor becomes fully charged.
Shows the amount of light emitted in lumens and graphically
shows what percentage of maximum light output is being
emitted from each set of LEDs (beam, ood, lantern).
Shows the beam projecting performance in meters.
Shows the battery’s voltage, the amount of current in Amps be-
ing charged into or being consumed by Luxor, and the amount
of power in Watts Luxor is currently using.
Shows the health of your battery and charge mode. Luxor keeps
track of your battery’s wear and tear and its charging condition.
Shows the angle of the light being emitted in DFS mode and
graphically shows what percentage of maximum light output is
being emitted from each set of LEDs’ (beam, ood, lantern).
To Next Page