Need help?Do you have a question about the PMA KS 90 and is the answer not in the manual?
Defines the structure of transmitted data, including start bit, parity, and stop bit.
Specifies adjustable baud rates for data transmission between instruments.
Explains how to set the address for instrument selection on a bus system.
Lists valid transmission control and data characters used in the protocol.
Outlines the overall structure of computer requests and controller replies in data transmission.
Details the conditions for ACK and NAK replies to write and read access requests.
Specifies the maximum response times for data queries and data transmissions.
Explains how volatile and non-volatile setpoints behave in remote and local modes.
Defines the structure of transmitted data, including start bit, parity, and stop bit.
Specifies adjustable baud rates for data transmission between instruments.
Explains how to set the address for instrument selection on a bus system.
Lists valid transmission control and data characters used in the protocol.
Outlines the overall structure of computer requests and controller replies in data transmission.
Details the conditions for ACK and NAK replies to write and read access requests.
Specifies the maximum response times for data queries and data transmissions.
Explains how volatile and non-volatile setpoints behave in remote and local modes.
General| Brand | PMA |
|---|---|
| Model | KS 90 |
| Category | Controller |
| Language | English |
To Next Page
