Need help?Do you have a question about the PMA KS40-1 and is the answer not in the manual?
Details on the safety switch mechanism and its operation.
Configuration of input signals (INP1, INP2) and digital inputs (di2, di3).
Description of the controller's front panel display and buttons.
Explanation of automatic, manual, and extended operating levels.
Information on error codes, their significance, and troubleshooting steps.
Steps and conditions for the automatic self-tuning function.
Instructions for manual adjustment of control parameters.
Describes the controller's navigation and level hierarchy.
Setting up controller functions via configuration word and codes.
Configuration for signaller and stepping controller functions.
Accessing configuration settings without external software.
Overview of available configuration parameters and switches.
Setting parameters for process inputs and outputs.
Configuration of set-point segments and timing for programming.
Adjusting input signal ranges for mA/V or sensor types.
Calibrating measured values by adjusting the offset.
Calibrating measured values using two reference points.
Initial setup and parameter definition for the programmer.
How to control the programmer and modify segments.
Details on input signals, outputs, and transmitter supply.
Operating environment, power, and safety compliance.
Material, protection modes, safety approvals, and certifications.
Connector types, mounting methods, and weight.
Warnings and basic safety guidelines for operation.
Steps for safe startup, shutdown, and unit maintenance.
Handling ESD-sensitive components and resetting to factory defaults.
Details on the safety switch mechanism and its operation.
Configuration of input signals (INP1, INP2) and digital inputs (di2, di3).
Description of the controller's front panel display and buttons.
Explanation of automatic, manual, and extended operating levels.
Information on error codes, their significance, and troubleshooting steps.
Steps and conditions for the automatic self-tuning function.
Instructions for manual adjustment of control parameters.
Describes the controller's navigation and level hierarchy.
Setting up controller functions via configuration word and codes.
Configuration for signaller and stepping controller functions.
Accessing configuration settings without external software.
Overview of available configuration parameters and switches.
Setting parameters for process inputs and outputs.
Configuration of set-point segments and timing for programming.
Adjusting input signal ranges for mA/V or sensor types.
Calibrating measured values by adjusting the offset.
Calibrating measured values using two reference points.
Initial setup and parameter definition for the programmer.
How to control the programmer and modify segments.
Details on input signals, outputs, and transmitter supply.
Operating environment, power, and safety compliance.
Material, protection modes, safety approvals, and certifications.
Connector types, mounting methods, and weight.
Warnings and basic safety guidelines for operation.
Steps for safe startup, shutdown, and unit maintenance.
Handling ESD-sensitive components and resetting to factory defaults.
General| Brand | PMA |
|---|---|
| Model | KS40-1 |
| Category | Controller |
| Language | English |
To Next Page
