PMA KS800 User Manual

RGB ELEKTRONIKA AGACIAK CIACIEK
SPÓŁKA JAWNA
Jana Dlugosza 2-6 Street
51-162 Wrocław
Poland
biuro@rgbelektronika.pl
+48 71 325 15 05
www.rgbautomatyka.pl
www.rgbelektronika.pl
DATASHEET
www.rgbautomatyka.pl
www.rgbelektronika.pl
OTHER SYMBOLS:
KS800-DP
KS800DP, KS800 DP, KS800-DP
PMA

PMA KS800 Specifications

General

Brand	PMA
Model	KS800
Category	Controller
Language	English

Summary

General

Cable Medium and Interface Properties

Describes the physical and electrical characteristics of the PROFIBUS cable and interface.

Address Settings

Explains how to configure the device address via coding switches or software.

Hints on Operation

Interface Connection

Covers the physical connection of the PROFIBUS-DP interface to the 9-pole sub-D socket.

Cable Installation Guidelines

Process Data

Status and Diagnosis Messages

Details the instrument-specific status and diagnosis messages for error monitoring.

Process Data Transmission

Describes the cyclic transmission of process and parameter data via the controller.

Parameter Transmission

Explains the use of the 'parameter channel' for data exchange.

General Communication Structure

Outlines the structure of telegrams for parameter transmission.

Data Write Sequence

Data Read Procedure

Data Types for Transmission

Classifies data values into types for transmission, such as FP, INT, ST1, ICMP.

Function Block Protocol

Data Structuring in Function Blocks

CODE Tables

Provides tables for codes used in function block communication and configuration.

INSTRUMENT Function Block Data

Special Accesses (FB 10-17)

INPUT Function Block (FB 60-67)

CONTR Function Block (FB 50-57)

ALARM Function Block (FB 70-77)

Function Modules

Function Module for SIMATIC S5

Details the function module for SIMATIC S5, including structure and parameters.

Structure and Parameters (S5)

Function Module for SIMATIC S7

Details the function module for SIMATIC S7, including structure and call parameters.

Structure and Call Parameters (S7)