wafer
™
back panel
Connections
To avoid potential damage, please ensure that your power amplifier(s) or receiver
is turned off before making or breaking any loudspeaker connections.
When selecting cables for use with your PMC loudspeakers, ensure that their
construction is of a high enough quality to withstand the rigours of everyday use.
While bare wire can be accommodated by the binding posts,
we recommend the use of either spade lugs or 4mm banana plugs in order to
maintain an electrical connection of the highest integrity and avoid the possibility of
short circuits. Please consult your dealer for more information regarding cable
lengths and termination options.
It is of vital importance to observe the polarity markings and maintain
positive-to-positive and negative-to-negative connections from amplifier or receiver
to the . The terminals are colour-coded to aid in their identification,
positive terminals are red, negative terminals are black.
loudspeaker user-guide
To Next Page
Loading...
