Basic Wireless E-TTL: MiniTT1 OO FlexTT5
No flash on Camera
1. Slide MiniTT1 Transmitter onto camera.
2. Slide remote Speedlite onto FlexTT5 Transceiver. Repeat for each remote Speedlite.
All remote E-TTL flashes will be treated as one zone of light.
3. Make sure all your PocketWizard radios are on the same channel and trigger normally.
This mode is like using Canon ST-E2 (non-ratio mode) or 580EX (I or II, master mode,
main flash off, non-ratio) in camera shoe.
Basic Wireless E-TTL: MiniTT1 OO FlexTT5
Flash on Camera
1. Slide MiniTT1 Transmitter onto camera.
2. Slide Canon 580EX Speedlite onto MiniTT1 radio.
3. Slide remote Speedlite onto FlexTT5 Transceiver. Repeat for each remote Speedlite.
All remote E-TTL flashes will be treated as one zone of light.
4. Make sure all your PocketWizard radios are on the same channel and trigger normally.
E-TTL
To Next Page
Loading...