1.3.4
Insert and Remove the SIM-SAM card
You must insert your SIM card to make phone calls. Please power off your
phone before inserting or removing the SIM card.
1.
Remove the Battery Cover and the Battery.
2.
Lift up the SIM rubber.
3.
Insert the SIM-SAM card into the slot. (Gold plate should face down). Make
sure that it is correctly inserted.
4.
To remove the card, repeat step1 and step2, then remove the card out of
the slot.
Note:
Your device only supports SIM cards. Do not attempt to insert
other SIM types such as “Micro” and “Nano” SIM card, this may cause
damage to your device. If you have to use different SIM card types,
please use “SIM adaptor”.
To Next Page
Loading...
Need help?
General
