14
CHARGE
1. Place the sensors into the dock and snap them firmly into place (make sure both ends of the sensors
snap into place). When the Polar logos on the sensor and dock face the same way, the sensors
are placed correctly.
2. Attach the AC power cord for your region to the dock first, and then plug the other end into a wall outlet.
3. The charging animation appears on the sensors.
ACTIVATE ACCOUNT
After purchase you’ll get a confirmation e-mail with a link. Click it to open a wizard which guides you through
setting up your organization and team in the web service. Follow the wizard and fill in the needed information.
Then go to teampro.polar.com, and sign in with your credentials.
TEAM SETUP THREE STEP WIZARD
The three step team setup wizard will guide you through the whole setup process in the Polar Team Pro web
service. With the wizard you'll create your team, choose the sport and add players. Fill in all the required fields
for each setting during the setup. If you do not have all of the player information available at this time, the
information can be updated later in the Team settings.
When you are done with a setting, choose NEXT to proceed to the next step of the setup. If at any time you
want to go back during the setup, choose PREVIOUS in the lower right corner.
1/3 GENERAL
Fill in the basic details of your team.
l Team name
l Team logo (optional)
l Default sport
l Team roles (you can use the default ones, create your own roles or not use the roles at all)
Choose NEXT to continue to the next step.
2/3 SPORT PROFILE
Define the heart rate zones and speed zones your team will use.
l Heart rate zones (choose default or free)
l Speed zones (default or free)
Choose NEXT to continue to the next step.
To Next Page
Loading...
