33
ADULT SECTION
Operation Warnings
n Check brake lever travel
Measure the clearance
between the lever and brake
block. Inspection should be
made with the lever
firmly depressed.
Distance A should be no
more than 3/4″ (1.9 cm).
Excessive travel indicates
a need to adjust the brake cable.
Refer to the mechanical brake adjustment information on page 61.
n Make sure the hood is securely latched
The hood of the snowmobile protects the operator from moving and hot
parts as well as aiding in sound emission control and various other func-
tions. Under no circumstances should your snowmobile be operated with
the hood open or removed.
n Test stop switch operation
Start the engine and push the stop switch down to test for proper
operation. The engine should immediately stop running.
n Test tether switch operation
Start the engine and disconnect the tether switch to test for proper
operation. The engine should immediately stop running.
n Remove the ignition key
Don’t t empt someone to steal or ride your snowmobile without
permission by leaving the key in the ignition.
n Check lights
Start the engine and check that both the headlight and taillight are
operating.
A
To Next Page
Loading...
Need help?
General
