75
MAINTENANCE AND LUBRICATION
Periodic Maintenance Schedule
Hours of operation are based on a 10 mph average. If service is due at
20 hours, the equivalent odometer reading would be 200 miles.
Perform all services at whichever reading is reached first.
NOTE: When inspection reveals the need for replacement parts, use
genuine Polaris parts available from your Polari s dealer.
Item Hours/
Miles
Frequency Remarks
Headlamp Pre-ride Pre-ride Check operation daily;
apply Polaris dielectric
grease to connector
when replaced
Taillamp Pre-ride Pre-ride Check operation daily;
apply Polaris dielectric
grease to socket when
replaced
Tires / Air pressure Pre-ride Pre-ride Inspect daily and before
each use
Brake system Pre-ride Pre-ride Inspect
Wheels Pre-ride Pre-ride Inspect
Frame nuts, bolts,
fasteners
Pre-ride Pre-ride Inspect; tighten when
needed
Fuel and oil tanks Pre-ride Pre-ride Fill to proper level
" Air box sediment
tube
Daily Daily Inspect; drain deposits
whenever visible
" Air filter
(pre-cleaner)
Daily Daily Inspect and clean
Coolant level Daily Daily Replace engine coolant
every two years
" Air Filter
(main element)
Weekly Weekly Inspect; replace if neces-
sary
Improperly performing the procedures marked with a J could
result in component failure and lead to serious injury or death.
Have an authorized Polaris dealer perform these services.
WARNING
To Next Page
Loading...
