67
MAINTENANCE
Transmission Oil Changing
Procedure
1. Locate and remove fill plug/
dipstick.
2. Remove transmission drain
plug located on the bottom
right hand side and drain the
oil. Catch and discard used oil
properly.
3. Clean and reinstall the drain
plug.
4. Add Polaris Premium Syn-
thetic Gearcase Lubricant
(PN 2871478) to full mark on
the fill plug/dipstick.
5. Check for leaks.
CAUTION: Be careful not to allow any dirt or foreign materials to enter the trans-
mission case.
Full
Operating
Range
To Next Page
Loading...
