GEM Owner’s Manual - Page 44
PROPER USE OF YOUR LAP AND SHOULDER BELT
1. Enter the vehicle and sit back.
2. The safety belt buckle is located above the back of the seat. Grasp
the buckle and pull out the belt. Slide the buckle up the webbing as
far as necessary to make the belt go around your lap.
3. When the safety belt is long enough to t, insert the buckle into the
latch until you hear a click. Make sure the button on the latch faces
upward or outward so that you are able to unbuckle your safety belt
quickly.
4. Position the lap belt across your thighs, and below your abdomen.
To remove slack in the lap belt portion of the belt, pull up on the
shoulder belt. To loosen the lap belt if it is too tight, tilt the buckle
and pull on the lap belt. A snug belt reduces the risk of sliding under
the belt in a collision.
5. Position the shoulder belt on your chest so that it is comfortable
In a collision, you and your passengers can suer death or serious injury if you
are not properly buckled up. You can strike the interior of your vehicle or other
passengers, or you can be thrown out of the vehicle. Always be sure you and others
in your vehicle are buckled up properly.
WARNING
Understanding the Standard
Features of Your Vehicle
To Next Page
Loading...
