29
OPERATION
Failure to operate the vehicle properly can result in a collision, loss of control, accident or overturn,
which may result in serious injury or death. Read and understand all safety warnings outlined in the
safety section of this owner’s manual.
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating condition before operating
increases the risk of an accident. Always inspect the vehicle before each use to make sure it's
in safe operating condition.
Item Remarks Page
Brake system/pedal travel Ensure proper operation 27
44
Brake fluid Ensure proper level 44
Front suspension Inspect, lubricate if necessary 41
Rear suspension Inspect, lubricate if necessary 41
Steering Ensure free operation 45
Tires Inspect condition and pressure 6
46
Wheels/fasteners Inspect, ensure fastener tightness 46
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Accelerator Ensure proper operation 27
Indicator lights/switches Ensure operation 22
Headlamp Check operation, apply POLARIS dielectric grease when
lamp is replaced
47
Brake light/tail lamp Check operation, apply POLARIS dielectric grease when
lamp is replaced
48
Seat belts Check length of belt for damage, check latches for proper
operation
28
Latches (hood/tailgate/seat) Ensure all latches are secure -
Batteries Ensure full charges, proper water levels, clean terminals 49-51
Battery cables Inspect for proper cable routing and secure connections 51
To Next Page
Loading...
Need help?
General
