Polaris 2878839 - Front Brushguard Installation

7515243-418E
A-7515243
FRONT BRUSHGUARD
KIT PN 2878839
- 1-
Imprimé en Chine / Printed in China
Applications:
2013 Polaris Ranger
Before you begin, read these instructions and check to be sure all parts and tools are accounted for. Please retain these
installation instructions for future reference and parts ordering information.
Tools Required: 13 mm Open-end Wrench and Socket, 6 mm Allen Key
IMPORTANT: Your Polaris accessory is exclusively designed for your vehicle. Please read the installation
instructions thoroughly before beginning. Installation is easier if the vehicle is clean and free of debris.
Approximate Installation Time: 30 minutes
The contents of this kit include:
Ref. Qty Part Description
 ..............1............Front Brushguard (Middle Section)
 ..............1............Front Brushguard (Left Section)
 ..............1............Front Brushguard (Right Section)
d ..............1............Left Support
e ..............1............Right Support
f ..............2............Taper Block
g .............12...........M8-1.25 X 20 mm Flange Bolt
Ref. Qty Part Descriptio
h ..............2............M8-1.25 X 130 mm Allen Socket
Machine Screw
i .............12...........M8-1.25 Flange Nylock Nut
j ..............2............M8 Lock Washer
1
2
3
4
5
6
7
6
7
7
8
8
9
9
9
9
10
10